| Photo-Bio-Reactor-Cell-Design-V1 - Materials |
|
Some PCV Pipe Fittings :
The bottom access to our algae reactor cell will be created using an unusual piece of plumbing. This right angle ¾” to ½” threaded adapter and end cap will cost anywhere from 40 cents to 1.50 for the pair. This is an ideal arrangement though for quick access to drain and fill your reactor or to connect to a larger harvesting array with a replicable connection |
|
Some More PCV Pipe Fittings:
This “T” fitting is a common piece of sprinkler system gear normally used to connect a sprinkler head to the underground lines. This is a ¾” fitting with a ½“ T that is threaded and will cost from 20 – 50 cents each |
|
PCV Pipe 3/4" :
This is 3/4” Schedule 40 PVC pipe that has been cut into 2 inch lengths. This piece is mere pennies in cost and serves to connect our right angle drain and T fitting. |
|
PVC End Caps:
This is a ¾” PVC pipe cap. These will run about 30-50 cents each at your hardware store. If you intend to use an air recirculation system for CO2 injection you will want to abandon this for a fitting that will be more appropriate for your need. |
|
